zoom_in
keyboard_arrow_down

Fix'Tape Capsule for FSL Sensor with Round Adhesive Tape

€9.50
Tax included

A 3D printed capsule + a round adhesive strip, 7cm in diameter

Choose your options:
Colour of the capsule
Tape colour

If you want to secure your FSL, but don't want to wear an armband, try the elastic adhesive band.

Thanks to the Fix'Style protective cap, which is placed on your FSL sensor, there is no risk of your sensor being removed with the tape when you want to change it.

In addition, by placing the capsule on the tape, you can stick it to your arm alone. We have tested it and filmed it, see under "Use".

You can choose between different models (round, bat, butterfly, cap, propeller cap) and different colours of tape (skin, red, pink, green, yellow, coral and blue)

Instructions for use:

1. The skin must be dry, free of grease, perfume and oil so that the band can be worn for as long as possible and with as little irritation as possible. In addition, excess hair should be shortened or removed beforehand.

2. The band is delivered pre-cut to the chosen shape. The corners are rounded for a better fit. The ends of the strip are always glued without stretching. This prevents premature detachment.

3. If you have the CapsuleFix'Tape, place it on the tape, then place both on your FSL sensor by pressing the tape with your fingers on the skin.

4. If the tape has been applied to the skin, rub it for a few seconds to activate the adhesive for a longer hold. Avoid going under water with the tape directly after application to keep it on longer. 

In Haylé's experience, water activity reduces the life of the tape to one day. But that's not bad.

Caution: In rare cases, allergic reactions may occur. On some skins the tape's glue does not stick, as can be the case with sensors or pumps. 

1 free tap for every 10 taps purchased!

Add 11 tapes in your cart, and the discount will be applied.